A general approach toward the synthesis of 8-acylamidopyrazolo[1,5-a]-1,3,5-triazines

An expedient synthesis of 8-acylamidopyrazolo[1,5-a]-1,3,5-triazines was developed by treating 8-amino-4-[N-(4-aminophenyl)-N-(methyl)amino]pyrazolo[1,5-a]-1,3,5-triazine with various acyl chlorides following by the displacement of the so-formed N-(methyl)-N-[4-(acylamido)phenyl]amino leaving group with various amines. Applications to high-throughput synthesis are suggested.     

Discovering patterns in time-varying graphs: a triclustering approach

This paper introduces a novel technique to track structures in time varying graphs. The method uses a maximum a posteriori approach for adjusting a three-dimensional co-clustering of the source vertices, the destination vertices and the time, to the data under study, in a way that does not require any hyper-parameter tuning. The three dimensions are simultaneously segmented in order to build clusters of source vertices, destination vertices and time segments where the edge distributions across clusters of vertices follow the same evolution over the time segments. The main novelty of this approach lies in that the time segments are directly inferred from the evolution of the edge distribution between the vertices, thus not requiring the user to make any a priori quantization. Experiments conducted on artificial data illustrate the good behavior of the technique, and a study of a real-life data set shows the potential of the proposed approach for exploratory data analysis.     

Chemoselective Polymerization Control: From Mixed‐Monomer Feedstock to Copolymers

A novel chemoselective polymerization control yields predictable (co)polymer compositions from a mixture of monomers. Using a dizinc catalyst and a mixture of caprolactone, cyclohexene oxide, and carbon dioxide enables the selective preparation of either polyesters or polycarbonates or copoly(ester‐carbonates). The selectivity depends on the nature of the zinc–oxygen functionality at the growing polymer chain end, and can be controlled by the addition of exogeneous switch reagents.     

Two-Photon Absorption and Cell Imaging of Fluorene-Functionalized Epicocconone Analogues

Epicocconone 1 is a natural chromophore isolated from the fungus Epicoccum nigrum that has shown applications in proteomics and fluorescent microscopy thanks to its unique pro-fluorescence properties. The modification of the skeleton of the natural product by replacing the triene side chain by a fluorenyl scaffold can noticeably increase the fluorophore's absorption coefficient. The synthesis of the analogues of the natural product has been made possible by the use of a palladium-catalyzed carbonylation reaction, allowing the construction of the β-keto-dioxinone key intermediate. Two-photon absorption cross-section measurements of the fluorenyl epicocconone analogues show a structure dependency with values ranging from 60 to 280 GM and live cell imaging show intense staining of intracellular vesicle-like structures around the nucleus.     

Mixed electrolytes in hydrophobic interaction chromatography†

An essential part of the modulation of protein‐binding capacity in hydrophobic interaction chromatography is the buffer‐salt system. Besides using “single” electrolytes, multicomponent electrolyte mixtures may be used as an additional tool. Both the protein solubility and the binding capacity depend on the position of a salt in the so‐called Hofmeister series. Specific interactions are observed for an individual protein‐salt combination. For salt mixtures, selectivity, recovery, and binding capacity do not behave like for the single salts that are positioned in between the two mixed components in the Hofmeister series, as the continuous correlation would suggest. Thus, finding strategies for mixed salts could potentially lead to improved capacities in hydrophobic interaction chromatography. Mixtures of ammonium sulfate, sodium citrate, sodium sulfate, sodium chloride, sodium acetate, and glycine were used to investigate the binding capacities for lysozyme and a monoclonal antibody on various hydrophobic resins. Resin capacity for two investigated proteins increases when mixtures consisting of a chaotropic and a kosmotropic salt are applied. It seems to be related to the rather basic isoelectric points of the proteins.     

Influence of Ga/(Ga + In) grading on deep‐defect states of Cu(In,Ga)Se2 solar cells

The benefits of gallium (Ga) grading on Cu(In,Ga)Se₂ (CIGS) solar cell performance are demonstrated by comparing with ungraded CIGS cells. Using drive‐level capacitance profiling (DLCP) and admittance spectroscopy (AS) analyses, we show the influence of Ga grading on the spatial variation of deep defects, free‐carrier densities in the CIGS absorber, and their impact on the cell's open‐circuit voltage V_oc. The parameter most constraining the cell's V_oc is found to be the deep‐defect density close to the space charge region (SCR). In ungraded devices, high deep‐defect concentrations (4.2 × 10¹⁶cm^–3) were observed near the SCR, offering a source for Shockley–Read–Hall recombination, reducing the cell's V_oc. In graded devices, the deep‐defect densities near the SCR decreased by one order of magnitude (2.5 × 10¹⁵ cm^–3) for back surface graded devices, and almost two orders of magnitude (8.6 × 10¹⁴ cm^–3) for double surface graded devices, enhancing the cell's V_oc. In compositionally graded devices, the free‐carrier density in the absorber's bulk decreased in tandem with the ratio of gallium to gallium plus indium ratio GGI = Ga/(Ga + In), increasing the activation energy, hindering the ionization of the defect states at room temperature and enhancing their role as recombination centers within the energy band. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Predicting New Ugi–Smiles Couplings: A Combined Experimental and Theoretical Study

Following our previous mechanistic studies of multicomponent Ugi‐type reactions, theoretical calculations have been performed to predict the efficiency of new substrates in Ugi–Smiles couplings. First, as predicted, 2,4,6‐trichlorophenol experimentally gave the corresponding aryl‐imidate. Theoretical predictions of nitrosophenols as good acidic partners were then successfully confirmed by experiments. In the latter case, the reaction offers a new access to benzimidazoles.     

Influence of chain structure on crystal polymorphism of poly(lactic acid). Part 1: effect of optical purity of the monomer

The influence of chain structure on crystal polymorphism of poly(lactic acid) (PLA) with high l-lactic acid content (97.8–100 %) is detailed in this contribution. Upon usual processing conditions of PLA, only α and α′ crystals grow, which makes these two polymorphs of major interest for research. The two crystal modifications have similar chain packing, which complicates their quantitative analysis by diffraction methods. The two crystal modifications are instead easily identified by analysis of the crystallization kinetics, which varies not only with temperature, but also with crystal polymorphism. The dependence of the rate of ordering on temperature shows two distinct maxima around 105–110 and 120–125 °C, which are related to growth of α′ and α crystals, respectively. Addition of d-lactic acid co-units leads to a decrease of the overall crystallization rate of PLA, as well as of the rate of spherulite growth (G) of both the crystal modifications. The relative crystallization rates of α and α′ forms are highly affected by stereoregularity, especially in the PLA grades that have a high crystallization rate. A high d-lactic acid content results not only in an overall slower crystal growth, but also in a varied temperature range where each of the two crystal modifications prevail, with a shift to lower temperatures of both the maxima of the G vs. temperature plots, indicating that inclusion of d-lactic acid units in the PLA chain affects crystallization rate of both α and α′ crystal modifications.